Advertisement
QuickSpecs
Technical Specifications
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
Application
Transfer rate
HP 1TB 6G SAS 7.2K rpm
SFF (2.5-inch) SC Midline
1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm
SFF (2.5-inch) SC Midline
1yr Warranty Hard Drive
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
652749-B21
652745-B21
DA - 12244 North America — Version 44 — December 9, 2013
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Physical Configuration
HP SAS Hard Drives
1,000,204MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
500,107MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.7 ms
8.7 ms
17.16 ms
7200 rpm
512
1,953,525,168
0.7 ms
8.7 ms
17.16 ms
7200 rpm
512
976,773,168
Page 12
Advertisement
