Option 2: Your client use PPPoE software to connect to your ISP.
Just keep your PC's setting as a DHCP client and execute the PPPoE software to
make the connection.
5.2
PPP Connection Mode
5.2.1
Configuring the HM210dp/di
1
Creating an ATM VC interface:
a
Select Routing > ATM VC > Add. The ATM VC - Add page appears:
Figure 14: ATM VC - Add
b
Enter the provided fields as below:
Field
VC Interface
VPI and VCI
Mux Type
Max Proto per AAL5
After entering the fields above, click the Submit button.
When the confirmation page appears, click Close.
c
d
You will return to the ATM VC Configuration table and see the newly
added ATM VC entry.
EN/LZT 108 6492 R1
April 2003
Description
Select a VC interface from the available interfaces, e.g. aal5-0 .
Enter the VPI/VCI values given by your ISP, e.g. 0/33
For PPPoE, select LLC
For PPPoA, select VC.
Keep the default 2.
Basic Configuration
25 (98)