Table of Contents
Advertisement
Figure 10: EOA Interface - Add
b
Enter the provided fields as below:
Field
EOA Interface
Interface Sec Type
Lower Interface
Config. IP Address/Net Mask
Use DHCP
Default Route
Gateway IP Address
After entering the fields above, click the Submit button.
c
When the confirmation page appears, click Close.
d
You will return to the EOA table and see the newly added EOA entry.
22 (98)
Description
Select an EoA interface from the available interfaces, e.g.
eoa-0 .
Public
Select the ATM VC interface you created in Step 1, e.g.
aal5-0 .
0.0.0.0 / 0.0.0.0
To use the HM210dp/di as a bridge, you don't need to set the
IP address and subnet mask. Just keep the default.
Disable
Disable
Leave it empty. You don't need to set the gateway.
Basic Configuration
EN/LZT 108 6492 R1
April 2003
Advertisement
Table of Contents
