Assigning Static Ip Information To Your Pcs - Ericsson HM210dp User Manual

5 In the Internet protocol (TCP/IP) Properties dialog box, click the radio button
labeled Obtain an IP address automatically. Also click the radio button labeled
Obtain DNS server address automatically.
6 Click OK twice to confirm and save your changes, and then close the Control
Panel.
3.2

Assigning Static IP Information to your PCs

In some cases, you may want to assign static IP information to your PC directly if:
In bridge mode, you have completed initial configuration and you need to use the
IP address and default gateway given by your ISP.
You have obtained one or more public IP addresses that you want to always
associate with specific computers (for example, if you are using a computer as a
public web server).
You maintain different subnets on your LAN.
Before you begin, contact your ISP if you do not already have the following
information:
IP address and subnet mask.
Default Gateway
DNS Server
On each PC to which you want to assign static information, follow the instructions for
displaying each of the TCP/IP properties (described in the previous section). Instead
of enabling dynamic assignment of the IP addresses for the computer, click the radio
buttons that enable you to enter the IP address, DNS and default gateway manually.
12 (98)
Local PC Configuration
EN/LZT 108 6492 R1
April 2003