Table of Contents
Advertisement
CD Playback
Compatibility of Discs
Before you load a disc, make sure that it is
compatible with the player.
Note that the following discs CANNOT be used
with this player.
I Laserdisc
I Pure Data Disc without MP3
I MiniDisc
To Load and Play an Audio CD
Make sure that you have properly connected the
DVD player:
1. Press OPEN/CLOSE on the front of the DVD
player or on the remote, the disc tray opens.
2. Place a disc gently into the tray with the disc's
label facing up.
3. Press PLAY to close the disc tray. The DVD
player reads the disc's table of contents and
the disc starts to play.
4. To search forward or reverse through the
track, press SEARCH (forward/reverse) on the
remote. To pause play, press PAUSE on the
remote or on the front panel. To release the
pause, press PAUSE or PLAY on remote or on
front panel again.
5. Press STOP to stop playback.
I All playback basics and transport functions are
described in detail on page 16.
Audio CD Playback Features
When playing audio CD's, your DVD player has
the same features as a CD player, including track
skip, repeat play and programmed playback. The
on-screen Info Display, appearing when REPEAT
or RANDOM is pressed (see page 29), and the
Status Banner shown below, appearing auto-
matically when the CD is played, let you choose
various playback features.
TRACK
TIME
I
I
TRACK
MARK
T-ELAPSED
1
OFF
00:00:17
I
BOOKMARK
Track: The number shown indicates the number
of the track that is currently playing.
Bookmarks: Highlight this area and press enter
to set or go to bookmarked locations on a disc.
Time Display Type: This shows the type of time
indication being shown: Time Elapsed or
Remaining for the Current Track, Total Elapsed for
the Disc, or Total Remaining for the Disc.
28 CD PLAYBACK
Using the Banner Display
As soon as a CD is played the Banner Display will
appear automatically. To delete it from screen,
press STATUS or CLEAR on the remote, to re-
access it, while the CD is playing, press STATUS
again. The Status Banner Menu cannot be used
in Stop mode, only in Pause or Play mode. In the
Display some of the playback features are illus-
trated with an icon. To access a feature, press the
appropriate ARROW (M or N) on the remote to
highlight the icon. Each feature is described in
the following pages.
Note:
To see the Status Banner Menu, you must turn
on your TV and tune it to the appropriate Video
Input Channel.
Information Menus
With CDs you have the same access to Info
Menus about the disc loaded (like disc type or
Audio resolution) or the player settings as with
DVDs, see page 26.
However with CD you must press the INFO
button during Stop or Resume mode, not
during Play.
Selecting a Track
1. During stop, resume or play mode, enter the
track number directly with the NUMBER (0~9)
buttons on the remote. The track selected will
be played at once.
2. Or press STATUS on the Remote to see the
Status Banner Menu on the screen if it's not
on already (as normally in play mode). Press
ARROW (M or N) on the remote to highlight
the Track No icon if not already highlighted (in
play mode this icon is highlighted automati-
cally). Enter the Track NUMBER (0~9) on the
Remote to select Track No.
I In all modes any track can be selected directly
by entering its number with the NUMBER
(0~9) buttons on the remote, no matter if the
Status Banner Menu is on or not.
I You can skip through tracks forward or back-
V
ward by pressing the NEXT/PREV. buttons
(track skip X / W) on the remote or SKIP
0
(forward/reverse) on the front panel.
I In stop mode the front display will show the
number of tracks recorded on a CD (below the
TRACK indicator) and the total time on disc.
Using Bookmarks
Bookmarks are a feature of the DVD 30 that
allows you to mark up to nine different points on
a disc and to quickly return to those points later.
The Bookmarks feature works on both DVD and
CD discs.
To Enter a Bookmark, Follow These Steps:
1. While a disc is playing, press STATUS on the
remote to see the Status Banner Menu (if not
already shown).
2. Use the ARROW (M or N) until the "Mark"
icon is highlighted and press ENTER, the
Bookmark menu appears.
3. When you reach the place on the disc you
want to mark, press ENTER.
4. To add marks, move the cursor with the
ARROW (L) to the "SET" line (if not already
there), then move the cursor to any free frame
with the ARROW (N). Press ENTER when the
next place on disc you want to mark is
reached.
5. Press STATUS or move the cursor to EXIT and
press ENTER to return to the Status Banner
Menu or press CLEAR on the remote to make
the Status Banner Menu disappear from the
screen.
Recalling a Bookmarked Scene:
1. While playing a disc, press STATUS on the
remote, the Status Banner Menu appears.
2. Press the ARROW (N) on the remote, until the
Mark icon is highlighted.
3. Press ENTER.
4. The cursor automatically will highlight the first
mark in the "JUMP" line of the Bookmark
menu.
5. Use the ARROW (M or N) on the remote to
select the bookmarked scene you want to acti-
vate.
6. Press ENTER to go to the bookmark.
7. Press STATUS or move the cursor to EXIT (far
right) and press ENTER to return to the Status
Banner Menu. To make the Status Banner
Menu disappear from the screen, press CLEAR
on the remote.
Hide quick links:
Advertisement
Table of Contents
