Amplifier/Receiver; To A Tv Or Monitor With Scart Or; Component Connectors - Harman Kardon DVD 30 Owner's Manual

Setup and Connections
Connecting to a TV or monitor with SCART or Component connectors and to an A/V Receiver with
6 Ch Direct Input for DVD-Audio (recommended).
Important Notes on SCART and RGB
format:
I Your DVD 30 is equipped with a SCART con-
nector for direct connection to the TV.
I The SCART connector provides the video
signal as well as audio (stereo L/R) signals.
I The SCART connector for the TV provides the
composite video signal or the direct RGB sig-
nal, delivering the best video performance
possible, selectable in the Setup menu. To
view RGB video on your TV, the RGB compati-
ble SCART connector on the TV must be used
and the DVD 30´s TV SCART connector must
be set to "RGB" (see page 17).
DVD 30
To 6 Ch Direct Input of A/V Receiver
or surround processor.
To optical or coaxial
input of Dolby Digital/
DTS Decoder/

Amplifier/Receiver

Note that with RGB video the color intensity
cannot be adjusted with most TVs.
I When the RGB video signal is used, DVD´s
recorded with the NTSC format (with regional
code 0 or 2) can be viewed even on non-
NTSC compatible TVs.
TV or Monitor
To SCART connector
To Component
connectors
Component Video Connection
If the video display has component video inputs,
connect the Component Video Outputs on the
DVD 30 to the corresponding input jacks on your
television. If you are using a progressive scan
television or projector, you must also change the
Scan Type in the DVD player's Video Set-Up
Menu from "Interlaced" to "Progressive." See
page 17.
Important note on DVD-Audio and SCART:
The full DVD-Audio output is only available on
the 6 Ch Direct Output. If the player is connect-
ed to a TV or monitor only using a SCART con-
nection (and not to a 6 Ch Direct Input on an
A/V Receiver), only the Front Left (FL) and Front
Right (FR) will be heard. In this case the Center
and Surround speakers need to be set to NONE
in the SPEAKER SETUP MENU on page 20.
To power outlet
(AC 230V/50 Hz)
SETUP AND CONNECTIONS 13