How To Look After Your Camera - BOLEX H16 SBM Instruction Manual

Table of Contents

Advertisement

How to look after your camera
42
The interior of the
camera,
housing
the
film drive
mechanism,
must
be
kept
spotless.
Gelatine
deposits
and dust sometimes accumulate in
the
gate and on the pressure
pad when unexposed film is run through the camera and should be removed as
follows:
a)
Open the pressure pad by lifting its
pin.
b)
Unscrew the shaft and remove
the
pressure pad by
pulling
it towards you.
c)
Gently clean the gate and pressure
pad,
paying special attention to the
aperture,
using
a clean cloth wound round the
end of a
small stick. If the gelatine deposit
is hard to
remove,
damp the
cloth and thoroughly dry
the
part after
cleaning.
d) Replace
the
pressure
pad.
Reflex prism.
The
reflex
prism in front of
the
aperture can
be
reached by rernovinq
'
the lens.
As
it is mounted on
hinges,
it can be swung out for
cleaning
the
back
and the ground glass. Use a
soft,
dry brush or special paper for cleaning these
parts.
The prism can
be cleaned
even when
the camera is
loaded (preferably in
the
shade).
Important!
The reflex viewfinder
must not be dismantled.
Lenses.
Keep the outer surfaces of your lenses absolutely clean with the
special
soft tissue paper sold in photographic
shops.
Avoid rubbing the lens more than
necessary as this could damage the anti-reflection coating.
Screw on the lens caps between
takes.
Special
care
should
be
taken to avoid dust
or fingerprints (perspiration
attacks
glass).

Advertisement

Table of Contents
loading

This manual is also suitable for:

H16 sb

Table of Contents