When The Film Is Only Partly Exposed - BOLEX H16 SBM Instruction Manual

When the film is only partly exposed
A lartly exposed film can be removed from the camera
as ollows:
1. Note the figure on the footage counter.
2. Close the variable shutter.
3. Disengage the motor and rewind the film until the
sign
ft.
appears opposite the white line in the mask.
/'~j
4. Open the camera lid and unload the camera in a dim
light.
5. Do not forget to open the variable shutter before
beginning the new film.
32
To replace a partly exposed film in the camera:
6. Load the camera as described on page 26.
7. Close the variable shutter.
8. Press the release until the footage counter reaches
the figure already noted.
9. Before beginning to film, it is advisable to press the
release and run the camera for a second or two, to
avoid the risk of double exposure.
---