Resetting Your Device; Restoring Factory Default State - Hand Held Products NAUTIZ X7 Manual

NAUTIZ X7 Manual - Chapter 8

Resetting Your Device

Occasionally, you may need to reset your device. For example, you should reset your device when it stops responding;
or appears to be "frozen" or "locked up."
To reset your device, remove the battery cover, use the stylus to press the reset switch, and then replace the battery
cover. Your device should restart.

Restoring Factory Default State

In some cases, you may need to restore your device to the factory default state by clearing the memory from your
device. For example, you should clear the memory:
• When your device does not respond after being restarted.
• When you forget your password.
Clearing the memory means all data you have entered in your device's memory, including all fi les, system settings and
additional programs you have installed, will be erased. (Programs installed to ROM at the factory are not affected.)
CAUTION: To ensure the integrity of your data should it be necessary to clear the memory, you are advised
to regularly back up your data.
Follow this procedure to clear the memory from your device:
1. Remove the battery and then replace it.
2. Press the left soft key and the Action key, and while keeping the two keys down, press the power button.
3. Release all the keys when you see the "Clean boot now" message.
74