Hand Held Products NAUTIZ X7 Manual page 61

Menu Items Description
Three choices:
Normal
1.
Mode
Burst
2.
Timer
3.
Brightness
Seven brightness levels
Resolution
Six choices from 160x120 to 2048x1536 (640x480 by default)
Zoom
Available choices depend on the resolution.
White Balance
Five choices from which you can select one that matches the current light source.
Flash
Flash on or off.
Full Screen
Full screen on or off.
Options
Overall settings to the Camera program.
Set to the frequency of the local electrical system (60Hz or 50Hz) for fl icker free shooting
Flicker
where electrical lights exist.
Night Mode
On or off. Set to On for shooting in low light situations.
NOTE: By default, the display area blanks out and shows the word "Standby" when the camera
has been idle for one minute. To resume, tap the screen.
3. Aim the camera lens at the subject. Press the
the color of the frame turns green indicating the subject is in focus.
4. Press the key fully to take the picture.
5. The result shows on the screen if the picture was taken in Normal or Timer mode. At this time, you can tap Menu to
perform a desired task to the current picture. Tap Camera or ok to go back to the Camera screen.
6. The picture is saved to the predefi ned storage location (as long as you didn't delete it in the previous step).
– Continuous shooting of 5 pictures
– 5 second countdown before shooting
key halfway down for automatic focusing. A white frame appears. Wait until
NAUTIZ X7 Manual - Chapter 6
61