Hand Held Products NAUTIZ X7 Manual page 66

NAUTIZ X7 Manual - Chapter 6
NMEA Log
To start logging, tap Setting
For each logging section, new data is added to the end of the existing data in the same fi le. By default, the log fi le is named
"GeTACGPSLog" and saved to "My Documents" folder on your device. To specify a different name and location for fi le, tap
Setting Log
SBAS Settings
SBAS (WAAS, MSAS, ENGOS) provides additional accuracy and reliability for the GPS devices. Ground stations are necessary to
achieve the purpose.
The SBAS feature works where such stations exist. To enable the feature, tap
Advanced. Tap the checkbox to enable or disable the SBAS function. A check (
Tap the checkbox to enable or
disable the function. A check (
indicates enabled.
Tap ok when fi nished. If you change the setting while a GPS program (such as TacLink) is running, the change takes effect only
after you exit the GPS program and then start it again.
66
Log Start. To stop, tap Setting
File.
)
Log Stop.
Settings System
) indicates enabled.
GPS