Operating The Radio - Mazda navigation system User Manual

Source button
Scan button
Radio ON
n
1.Press the SOURCE button.
2.Select the
Band selection
n
Choose AM by pressing the
button.
The selected mode will be indicated. If FM stereo is being received, STEREO will be
displayed.
Tuning
n
The radio has the following tuning methods: Manual, Seek, Scan, Preset channel, and Auto
memory tuning. The easiest way to tune stations is to set them on preset channels.
Note
lIf the FM broadcast signal becomes weak, reception automatically changes from STEREO
to MONO for reduced noise, and the STEREO indicator will go out.
lTo clear the information, press the MAP/VOICE button.
lIf the power supply is interrupted (fuse blows or the battery is disconnected), the preset
channels will be canceled.
Manual tuning
n
Turning the TUNE AUDIO dial will change the frequency higher or lower.
Seek tuning
n
Pressing and holding the SEEK/TRACK button (
higher or lower frequency automatically.
78

Operating the Radio

Channel preset on-screen button
or on-screen button to turn the radio on.
on-screen button and FM by pressing the
Tune audio dial
AUTO-M on-screen button
, ) will cause the tuner to seek a
on-screen