Related Manuals for Mazda CI-VL2-MAZDA3
Summary of Contents for Mazda CI-VL2-MAZDA3
- Page 1 CI-VL2-MAZDA3 Installation Manual Product Name: CI-VL2-MAZDA3 Product Type: Video Interface with (optional) build in navigation Application: All Mazda 2014/2015 cars with new Mazda Connect systems...
- Page 2 What's in the box: Item Description Part No. Video Interface Power Interface Harness Audio RCA Cable Video RCA Cable LVDS Cable Relay Interface Cable Speaker (optional) GPS Antenna (optional)
- Page 3 Description: This video interface is used to install navigation (optional), reverse camera and 2 other video inputs onto the car screen. It has 4 video inputs: 1. RGB port (External navigation or External Android box). 2. Video In1 (used for DVD, Digital TV, DVR etc). 3.
-
Page 4: Connections Diagram
Connections Diagram: Connect behind Audio RCA GPS Antenna LVDS Cable GPS Speaker Connect SD Card behind CD unit Interface Power Video RCA CTRL Port Connect Connect to ACC behind and Reverse Trigger... - Page 5 How to connect Power cable: Connect the Yellow and Red wire together to Connect to Reverse trigger Connect separate GREY ACC of the Car. of car(reverse light) wire here.
- Page 6 RGB Port: The RGB port can be used to connect external GPS module. Can also be used to connect external Android Box (provided as optional). The Android box has powerful hardware and customized UI for optimized use in a car while driving. The Camera can be connected using the Video RCA cable provided.
- Page 7 DIP Settings: DIP Down= ON DIP UP= OFF Default External RGB connected. Internal GPS module UP(OFF) (when using external Enabled. GPS/Android box) External video source 1 External video source 1 UP(OFF) enabled (DVD/Digital TV etc) Disabled External video source 2 External video source 2 UP(OFF) enabled (DVD/Digital TV etc)
- Page 8 OSD Menu Operation: The OSD Menu can be brought up by using the three buttons on the interface. Each Video input i.e. GPS, Video1, Video2, Camera and RGB can be adjusted separately. The interface has 5 separate memory states for each setting. The keys used are "menu"...
- Page 9 Extra Control Port: Extra control port: This interface has released a lot of hidden functions, so the 3rd party can use it for various usages. The Extra control port close to the power connector 1 the 4-pin in the up row touch screen 4Pin input, when in DVD or TV, the touch foil can be switched and connected to these 4Pin, so the controller inside can read the touch operation and location and generate the IR code for DVD etc.
- Page 10 Parameters: Name Parameter RGB Navigation resolution 800*480 HD suggested. Video source 1, Video Source 2, 0.7Vpp with 75 ohm impedance Reverse Camera NTSC/PAL/SECAM automatic switch GPS antenna 5V active antenna from the golden finger connector Reverse control wire >5v will switch it to camera mode. All wires can tolerate 12V for <10 seconds.
- Page 11 Navigation Functions (optional): When switching to navigation the main menu will be shown. To setup up navigation press the "Navigation" icon. If first time use it will take you to page where user can select default path for the navigation software through the SD card.
- Page 12 When starting for first time. Remove SD card and enter navigation mode. It will automatically start touch screen calibration. Press the corresponding crosses on the screen to complete touch calibration. The main menu consists of three icons. Navigation, Setup and Multimedia. The Setup Icon will let you go to options menu.
- Page 13 Multimedia can be accessed from the main menu. This includes music, video, digital books, photos and Bluetooth music. The audio is sent out through AUX port and can be connected to the cars OEM speaker system. The files for multimedia are stored on usb and can be accessed using mini USB to USB hub cable.
- Page 14 FAQs: Navigation video is slightly out of position. In case the video is slightly out of position, it is usually a few centimeter's up or down of optimal position. There are two adjusting methods: (1) Open navigation settings - Screen - screen settings, there you can adjust the position of the navigation video.
-
Page 15: Optional Accessories
Optional Accessories: 1. Smartphone Receiver: This is a specially designed HDMI receiver box that converts HDMI to High definition RGB input for the interface. Connect to Power from CAN box. ACC and GROUND. Connect to AUX for OEM speakers. Connect to RGB of Interface. The HDMI in can be used to connect to phones directly (phones equipped with HDMI out function). - Page 16 It can also be connected to Wireless Smartphone dongle(also provided as optional) to display the phones screen through Miracast, Airplay or DLNA. Miracast wireless mirroring for Airplay or DLNA wireless mirroring for IOS Android phones. phones. To connect the Smartphone receiver connect the RGB cable to the RGB port on interface.