Deleting The Link To A Mobile Telephone; Changing The Registered Mobile Telephone - Mazda navigation system User Manual

Note
lIf the ignition switch is turned off during a hands-free call, the line is transferred to the
mobile telephone automatically.
lIf the mobile telephone is in a location where radio reception is difficult such as a metal
container or in the trunk, the call may not be connected using Bluetooth. If communication is
not possible, change the location of the mobile telephone.
Mobile telephone programming
n
To use Bluetooth Hands-Free, the phone has to be programmed to the hands-free unit using
the following procedure.
A maximum of seven devices including hands-free mobile phones and Bluetooth audio
devices can be programmed to one vehicle. Refer to "Bluetooth audio device programming".
( page 94)
Note
lA mobile telephone can be programmed only when the vehicle is parked.
lIf a Bluetooth device has already been programmed to the vehicle as a Bluetooth audio
device, it does not need to be programmed again when using the device as a hands-free
mobile phone. Conversely, it does not need to be programmed again as a Bluetooth audio
device if it has already been programmed as a hands-free mobile phone.
lSince the communication range of a Bluetooth equipped mobile telephone is about 10
meters (32 ft), if a mobile telephone is placed within a 10-meter (32 ft) radius of the vehicle,
it may be detected/programmed unintentionally while another telephone is being
programmed.

Deleting the link to a Mobile telephone

n
Refer to "Deleting the link to a Bluetooth audio device". (

Changing the registered mobile telephone

n
Refer to "Changing the registered Bluetooth device". (
page 96)
page 98)
115