Screen Adjustments, Beep Alert And Other Settings - Mazda navigation system User Manual

Screen adjustments, beep alert and other settings

Display menu screen will be shown when you press the disp button (DISP).
Press the disp button (DISP) to display the display menu.
Adjusting the screen quality
n
lScreen brightness
Press the
lScreen contrast
Press the
Note
lSelect the
lThe screen changes to SETTINGS when the
Turning off the display
n
Select the
Press the MAP/VOICE or MENU button to turn on the display.
Press the RETURN button to return to the display previously shown.
Tilt display operation
n
Select the
The display angle can be adjusted in three stages.
When opening, the display angle changes one stage at a time each time the
screen button is pressed.
When closing, the display angle changes one stage at a time each time the
button is pressed.
Daytime/Night screen
n
When the headlights are on, daytime mode can also be selected (if a brighter screen is
needed at night). This selection can only be done when the headlights are on.
lThe screen can be returned to the daytime screen while the headlights or running lights are
on by rotating the dashboard illumination knob clockwise fully. You will hear a beep sound
and the illumination dimmer will be canceled.
26
on-screen button to brighten the screen, or
on-screen button to increase contrast,
on-screen button to restore the adjustment values to the default settings.
on-screen button to turn off the display.
on-screen button to tilt the display,
to darken.
to decrease.
on-screen button is selected.
to close it.
on-
on-screen