Mazda navigation system User Manual page 12

2
Select the MAP on-screen button to open the display.
MAP on-screen button
3
Insert the map disc
with the printed side
facing up.
12
Note
lCondensation may form on the optical lens or the map
disc inside the unit when the temperature in the vehicle
increases in a short time such as when heating the car
on a cold day. This condensation may cause
malfunctions. If so, unload the map disc and do not
operate the unit for approximately 1 hour. Wipe the
condensation off the map disc with a soft cloth.
If the unit does not operate correctly after 1 hour,
consult an Authorised Mazda Dealer.
Note
lWhen the ignition switch is in the ACC or ON
position, the screen changes as shown above to
activate the navigation system.
lThe screen (audio or navigation) that was displayed
prior to the engine being turned off is displayed.
Before the navigation screen is displayed, the
CAUTION screen will be displayed.
(CAUTION) screen