Cd Player/Changer Operation (Optional); Playing Optional Cd Player Or Changer; Music Sensor (Skip); Fast Forward And Backward - Alpine CVA-1003E Owner's Manual

CD Player/Changer Operation (Optional)

Track number
(DISC number in the
Changer Mode)
The current setting status
Playing Optional CD Player or
Changer
When an optional Alpine CD player or CD
changer is connected, you can control it from the
CVA-1003E. This section describes operation
assuming that an Alpine CD player is connected.
(When a CD changer is connected, see page 15
to select your desired disc.)
You can directly select the CD Changer mode by
pressing the CHG (changer) button on the CVA-
1003E.
1
Press the SOURCE button until the "CD"
appears in the display.
Insert a CD into the CD player, the player starts
playing.
2
To pause playback, press the :/J button.
Pressing the :/J button again will resume
playback.
3
To eject the CD, press the eject (c) button on
the CD player.
12
-EN
: : : : : /J J J J J
SOURCE
g DN g g
g g
f f
f UP f f
Example of CD mode Screen
Volume Level
RPT
M.I.X. CHG SCAN
Current Time

Music Sensor (Skip)

1
Momentarily press the g DN button once
during CD play to return to the beginning of the
current track. If you wish to access the beginning
of a track further back, repeatedly press until you
reach the desired track.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access
the beginning of a track further ahead, press
repeatedly until the desired track is reached.
NOTE
The music sensor feature is functional in the play or
pause mode.

Fast Forward and Backward

1
Press and hold the g DN or f UP button to
quickly move backward or forward until you
reach the desired section of the track.
Selected Source
Elapsed playing time