Connecting To An External Amplifier; Setting Adaptive Steering Remote Control; Setting The Language Font; Demonstration - Alpine CDA-9885R Owner's Manual

Connecting to an External Amplifier

Power IC ON (Initial setting) / Power IC OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
Power IC OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit's internal amplifier is
turned OFF and cannot drive speakers.
Power IC ON: The speakers are driven by the built-in amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.

Setting Adaptive Steering Remote Control

Steering ON / Steering OFF (Initial Setting)
This unit is compatible with the adaptive steering remote control.
This function allows operation by sending the steering remote control
signal to the unit.
To use the steering remote control, perform the following button
operations after setting to ON and pressing
For details, consult your nearest Alpine dealer.
1
Select the assigned function by turning the Rotary
encoder.
(e.g. Select SOURCE)
POWER SOURCE BAND
PAUSE MUTE BWD
A.PROC POWER
FF SOURCE FF
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Speakers
Front
right
Rear
right
Rear
left
Front
left
/ /ENT.
VOL. UP VOL. DN
FWD P. UP P. DN
2
Press the steering remote control button until the
changed signal value of steering remote control
appears in the left of the display.
(e.g. Press SOURCE of the steering remote control button.)
The changed steering remote control signal appears in the
left of the display.
DE SOURCE FF
The changed signal value of steering remote control
3
Press / /ENT to execute the setting value.
The confirmed signal value of steering remote control
appears in the right of the display. With doing so, the
function of the unit is assigned to the steering remote
control button.
DE SOURCE DE
The confirmed signal value of steering remote control
4
Repeat steps 1 to 3, and set each button.
When settings have been completed, press AUDIO/RTN to
return to the previous mode.

Setting the Language Font

Language 1 (Initial Setting) / Language 2 / Language 3
Three types of font can be selected.
Language 1: Normal font
Language 2: European font
Language 3: Russian font

Demonstration

Demo ON / Demo OFF (Initial setting)
This unit has a demonstration feature for the display.
• To quit Demo mode, set to Demo OFF.
21
-EN