Repeat Play; Random Play); Searching From Cd Text - Alpine CDA-9885R Owner's Manual

• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold
• The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
File number display
Folder number display
19
00:00
Clock display*
* Displayed when "Turning the Clock Display ON/OFF" (page 20) is
set to ON.
• Press TITLE to switch the display. See "Displaying the Text"
(page 18) for information about display switching.

Repeat Play

Press 4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
: Only a track is repeatedly played back.
: A disc is repeatedly played back.
1
* When a CD changer is connected.
• If RPT is set to ON during M.I.X. play in CD changer mode, M.I.X.
will apply to the current disc only.
MP3/WMA/AAC mode :
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
: A disc is repeatedly played back.
2
* When an MP3 compatible CD changer is connected.
for at least 2 seconds.
Elapsed time
20 0:53
• If a CD changer or an MP3 compatible CD changer is connected:
After pressing FUNC./SETUP to select the function mode (RPT/
M.I.X.), perform the operation within 10 seconds.
M.I.X. (Random Play)
Press 5 in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5
CD mode :
: The tracks are played back in random
sequence.
: The tracks on all the CDs in the current
magazine will be played back in the random
sequence.
3
* When a CD changer equipped with the ALL M.I.X. function is
connected.
• If M.I.X. is set to ON during RPT
changer mode, M.I.X. will apply to the current disc only.
MP3/WMA/AAC mode :
: Only files in a folder are played back in
random sequence.
: The files are played back in random
sequence.
If an MP3 compatible CD changer is
connected, all files in a disc are played back
in random sequence, and playback shifts to
the next disc.
• If a CD changer or an MP3 compatible CD changer is connected:
After pressing FUNC./SETUP to select the function mode (RPT/
M.I.X.), perform the operation within 10 seconds.

Searching from CD Text

Tracks can be searched and played by using the CD text on the disc. If a
disc is not compatible with text, or a disc is in the changer, searches can
be made by track number.
1
Press /ESC during play.
This will set the search mode.
2
Turn the Rotary encoder to select the desired
track, and then press
This will play the selected track.
• Press and hold /ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
• CD text search cannot be made during M.I.X. play.
again.
(REPEAT ALL) play in CD
/ /ENT.
13
-EN