Alpine CVA-1004R Owner's Manual page 6

WARNING
Operation of some of the functions of this unit is very
complex. Because of this, it was deemed necessary to
place these functions into a special screen. This will
restrict operation of these functions to times when the
vehicle is parked. This ensures the focus of the driver's
attention will be on the road and not on the CVA-1004R.
This has been done for the safety of the driver and
passengers.
The Title Input and SETUP screens cannot be made while
the car is moving. The car must be parked and the parking
brake must be engaged for the procedure described in the
Owner's Manual to be valid. These operations are not
possible while you are driving. Also if you attempt to
drive during operation, the display will show the warning
"CAN'T OPERATE WHILE DRIVING" for 5 seconds.
This operation is the same as when selecting sources
using the remote control (Optional). When the car is
parked, the selection is made as described in the Owner's
Manual.
Alpine products equipped with the Ai-NET bus,
connected to the CVA-1004R, can be operated from the
CVA-1004R. Depending on the products connected, the
functions and displays will vary. For details, consult your
Alpine dealer.
4
-EN