Changing Audio Level Display Pattern; Setting The Aux Mode - Alpine CDM-7870R Owner's Manual

Changing Audio Level Display
Pattern
1
Press the DISP button to switch the display
pattern.
DISP1 DISP2
DISP1:
Lights the Volume indicator and Audio Level
indicator.
DISP2:
Lights the mode and value bars to show the
settings in the Bass engine display.
NOTE
The last mode set will remain in effect. The mode and
value bars light and show the Bass engine settings.
DISP OFF:
Turns off the light in Bass engine display.
If you set DISP OFF, the Volume indicator, Audio
Level indicator, and Bass engine displays are not
lit at all times.
DISP OFF
Volume indicator
Audio Level indicator
Example settings:
Bass centre frequency:
100 Hz
Bass band width: WIDE1
Bass level: - 6

Setting the AUX Mode

You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface
cable KCM-122B) to this component.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the g DN or f UP button to select
the AUX mode.
FM LV
AUX 100kHz/50kHz
3
Press the BAND button to toggle the mode
between AUX ON and AUX OFF.
4
Press the SETUP button to return to normal
mode.
5
To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
TUNER CD/TAPE
NOTE
When AUX ON is selected, a CD Changer cannot be
used.
Basic
REG SUB
AUX
9
FR
ES
DE
IT
SE
-EN