Table of Contents
Advertisement
OPERATING INSTRUCTIONS(cont.)
• Power Button:
Press this button to switch ON/OFF of monitor's power.
• MENU / ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu
when in Brightness/Contrast OSD status.
• Contrast :
Adjust contrast or function adjust.
• Brightness :
Adjust brightness or function adjust.
• Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as
EXIT-KEY (EXIT OSD menu).
2. When OSD menu is in off status, press this button over 2
seconds to activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos,
Clock and Focus.
• Power Indicator:
Green — Power On mode.
Amber — Standby mode.
OSD Lock Function:
OSD lock - all 4 buttons are locked except the "POWER"
Option 1:
button. Press and hold the "MENU" and "V" buttons for 3
seconds to lock the buttons. Repeat this step to unlock.
OSD & Power button lock - all 5 buttons including the
Option 2:
"POWER" button are locked.
"MENU" and " AUTO" buttons for 3 seconds to lock all 5
buttons. Repeat this step to unlock.
NOTES
• Do not install the monitor in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, or
excessive dust or mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they
will come in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was
originally packed at the factory.
• To keep the monitor looking new, periodically clean it with a soft
cloth. Stubborn stains may be removed with a cloth lightly
dampened with a mild detergent solution. Never use strong
solvents such as thinner, benzene, or abrasive cleaners, since
these will damage the cabinet. As a safety precaution, always
unplug the monitor before cleaning it.
12
Press and hold the
Advertisement
Table of Contents
