Status Led Indications - Brother MFC-8880DN User Manual

Status LED indications

The Status LED (light emitting diode) will flash and change colour depending on the machine's
status.
LED Machine Status
Sleep Mode
Warming Up
Green
(blinking)
Ready
Green
Receiving Data
Yellow
(blinking)
Data Remaining
in Memory
Yellow
Service error
Red
(blinking)
Description
The power switch is off or the machine is in Sleep mode.
The machine is warming up for printing.
The machine is ready to print.
The machine is either receiving data from the computer,
processing data in memory, or printing data.
Print data remains in the machine memory.
Follow the steps below.
1. Turn off the power switch.
2. Wait a few seconds, and then turn it back on and try to print
again.
If you cannot clear the error and you see the same service call
indication after turning the machine back on, please call your
Brother dealer for service.
General information
1
9
1