Cleaning The Corona Wire - Brother MFC-8880DN User Manual

c
Wipe the laser scanner window (1) by
wiping it with a dry lint-free soft cloth.
d
Put the drum unit and toner cartridge
assembly back in the machine.
e
Close the front cover.
f
Plug the machine's power cord back into
the electrical socket first, and then plug
in the telephone line cord.Turn on the
machine.
154

Cleaning the corona wire

If you have print quality problems, clean the
corona wire as follows:
a
Turn off the machine. Unplug the
telephone line cord first, disconnect all
cables, and then unplug the power cord
from the electrical socket.
b
Open the front cover and slowly take out
the drum unit and toner cartridge
assembly.
1
• We recommend that you place the drum
unit and toner cartridge assembly on a
clean, flat surface with a sheet of
disposable paper or cloth underneath it in
case you accidentally spill or scatter toner.
• Handle the toner cartridge carefully. If
toner scatters on your hands or clothes,
wipe or wash it off with cold water at once.
• To prevent damage to the machine
caused by static electricity, DO NOT touch
the electrodes shown in the illustration.
IMPORTANT
C