Table of Contents
Advertisement
3 SpeedTouch™ Web Interface
IP Addresses
40
C
lick this link to display the IP Addresses page.
This page allows you to view or add/delete specific IP address entries for Speed-
Touch™'s interfaces:
To add an IP address for one of the SpeedTouch™ interfaces:
1
Click New.
2
In the Interface field, select the interface to which the IP address applies (use eth0
for assigning to the SpeedTouch™ Ethernet interface).
3
In the Address/Mask field, provide IP address and (sub)netmask in IP prefix nota-
tion (e.g. 192.6.11.150/24) or select Obtain an IP address automatically for assigning
a dynamic IP address to the interface.
4
In the Translation field, select NAPT if you want to enable address translation on
this IP address.
5
Click Apply
6
In the SpeedTouch™ web page, click Save all to save your changes to persistent
memory.
E-SIT-CTC-20030605-0003 v1.0
Hide quick links:
Advertisement
Table of Contents
