Introduction - Fujitsu Siemens Computers D1215 Technical Manual

Introduction

Depending on the configuration of your system board, some of the hardware components
i
described may not be available.
You may find further information e. g. in the complete Technical Manual for the system board and in
the description "BIOS Setup".
Further information to drivers is provided on the supplied drivers diskettes or on the
"Drivers & Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing
drivers". The latest BIOS version or drivers can be found on the internet under
http://www.fujitsu-siemens.com/en/service.
Computer system boards and components contain very delicate IC chips. To protect them
!
against damage caused by static electricity, you must follow these precautions:
·
Use a grounded wrist strap.
·
Unplug your computer before you remove any part of the casing.
·
Place the system board and the components on a grounded antistatic pad whenever
you remove them from the computer.
Hold components by the edge, do not touch any pins or connectors on them.
Once you have installed the system board, you should remove the battery protection (i.e.
the thin plastic plate between battery and contact spring).
A26361-D1215-Z181-1-7619
1
English -