Cleaning The Imaging Guides - Kodak ScanMate i940 User Manual

Cleaning the imaging guides

1. Open the top cover and open the scanner cover.
2. Remove dust and debris from the front and rear imaging guides by
using a Staticide wipe or a small brush. Be careful not to scratch the
glass.
IMPORTANT: Staticide wipes contain isopropanol which can cause eye
irritation and dry skin. Wash your hands with soap and
water after performing maintenance procedures. Refer to
the MSDS for more information
3. Wipe the front and rear imaging guide again with an almost dry
Staticide wipe to remove any streaks.
4. When finished, close the scanner cover and reconnect the power.
A-61766 October 2012
.
Imaging guides
26