Kodak ScanMate i940 User Manual page 32

NOTE: It may be necessary to place your finger in the opening
underneath the scanner cover and push up on the module to
release it from its position.
• If the feed module tires are worn and there is a degradation of
feeder performance, replace the feed module and go to Step 6.
• If the feed module tires need to be cleaned, continue with Step 5.
5. Wipe the rollers from side to side.
6. Reinstall the cleaned feed module or install a new feed module.
7. Reinstall the feed module cover and close the scanner cover.
A-61766 October 2012 25