Component Identification - Graco MAGNUM 261800 Operation Manual

Component Identification

Project Painter 5
A
™
AllControl
B Pump fluid outlet fitting
C Suction tube
D Prime tube (with diffuser)
E Inlet screen
E1 Inlet screen handle
F Hopper cover
G Pour spouts
H Hopper
J Tip holder
K Hopper handle
L Paint tray
M Disposable hopper liner
N Practice Spray Board
P ™
Power Flush
R Paint hose
S Airless spray gun
T Tip guard
U Reversible spray tip
V Gun fluid filter
W Roller attachment
X Gun trigger safety lever (page 7)
312079A
•
•
•
•
•
•
Threaded connection for paint hose.
Draws fluid from paint pail or hopper into pump.
Drains fluid in system during priming and pressure relief.
Prevents debris from entering pump.
Aids in the installation and removal of the inlet screen.
Prevents debris from entering hopper.
Directs paint out of hopper and back into paint container.
2.5 gal. (9.5 L) capacity hopper that holds paint.
Storage for 2 spray tips.
Press and turn handle to allow access to hopper and paint
tray.
Built in paint tray to rest roller attachment when not in use.
Fits directly in hopper and is disposable for simple cleanup.
Instructs user on how to perform basic spraying techniques
and provides surface to practice techniques prior to spraying
surfaces.
Connects garden hose to suction tube for power flushing
attachment
water-base fluids.
Transports high-pressure fluid from pump to spray gun.
Dispenses fluid.
Reduces risk of fluid injection injury.
•
•
Filters fluid entering spray gun to reduce tip clogs.
Attaches to spray gun for pressure rolling directly on
surfaces.
Prevents accidental triggering of spray gun.
STORAGE: for long term or overnight shutdown and stor-
age.
OFF: turns motor off for short term shutdown and
relieves system pressure.
PRIME/CLEAN PUMP: turns on motor and directs fluid
to prime tube.
ROLL: directs low pressure fluid to roller (when used)
PRIME/CLEAN GUN & HOSE: directs fluid to gun and
hose.
LOW SPRAY to HIGH SPRAY: directs fluid to spray gun.
Atomizes fluid being sprayed, forms spray pattern and
controls fluid flow according to hole size.
When reversed, unclogs plugged tips without disassem-
bly.
Component Identification
5