Installing The Plugin - Q-See QT528 User Manual

3. Select the option for "Open in 32-bit mode" in Safari's info window.
PICTURE 7-57

INSTALLING THE PLUGIN

You will now need to download and install the Webkit Plugin by following the seven steps
below:
1. Launch Safari and enter your DVR's IP address or DDNS address. The browser window
will ask you to download the plugin. You receive this message only when you access the DVR
with this computer for the first time, or after the DVR's firmware was updated.
PICTURE 7-58
68
2. Click on the downward-pointing arrow icon to download the installation package.
PICTURE 7-59
3. If the download window did not automatically pop up, click on "Downloads" in the
"Window" menu of the browser.
PICTURE 7-60
69