Level Controller - Parrot You Com User Manual

3.3

Level controller

Three settings can be adjusted with the use of the level controller, the 2-digit
display and the INPUT/PHONES/RETURN lights:
fine tune the microphone or line input (set by the sensitivity switches)
-
set the headphones volume
-
set the mix between the local and remote signals (in case of a LIVE or a USB
-
connection) towards the headphones
PHONES will light up by default
to adjust the phones level. The
Parrot will always return to
PHONES after a short idle time.
Press the level controller briefly
to turn on the INPUT light and
adjust MIC/LINE input-level.
Press and hold the level controller until RETURN lights up to change the mix
between the local signal (low side of the bar) and the return signal (high side of
the bar). RETURN will normally be somewhere in the middle.
PHONES will turn on again when the level-controller is not used for about 5
seconds.
© 2005 Parrot 21