Synchronising The Phonebook; Recording Voice Tags - Parrot MINI KIT Smart User Manual

Managing the "Memory full" problem
You can pair up to ten devices. If you attempt to pair an eleventh phone, the kit says «memory full». You
must clear the memory by holding down both the red button and the jogwheel for three seconds. Doing so
also clears all the contacts.

Synchronising the phonebook

With some Bluetooth phones, the phonebook is automatically synchronized in the kit's memory.
Notes:
- The automatic synchronization is limited to 2 000 contacts for each paired phone and to 20 000
contacts for all paired phones.
- The synchronisation will relaunch itself each time your phonebook has been modified.
If your phone doesn't support automatic synchronization, you can also send contacts manually from
your mobile to the car kit via Bluetooth. To do so, select
guide for more information about sending contacts (via Object Push).

Recording voice tags

All your contacts, after automatic synchronization or Object Push process, are directly provided with a
voice tag in the Parrot MINIKIT Smart. Consequently, you don't have to record your own voice tag on
each contact to make a call via the voice recognition process.
However, if the Parrot MINIKIT Smart doesn't understand the name of one of your contacts or if a voice
tag is too long, you can record a new one. To do so, select
and record your voice.
Receive contacts. Refer to your phones' user
and then select the contact
Add voice tags
Getting started 9