Navigating Through The Menus; Pairing And Connecting A Phone By Bluetooth; Synchronising The Phonebook - Parrot MINIKIT+ Quick Start Manual

Navigating through the menus

• Press the jog wheel to access the main menu.
• Browse through the menus by turning the jog wheel and confirm with the green button or
by pressing the jog wheel.
• To exit the menu, press the red

Pairing and connecting a phone by Bluetooth

• Before using the Parrot MINIKIT+ with your phone, you first have to pair both devices. The
pairing process is only required once.
1. From your Bluetooth
peripherals.
2. Select "MINIKIT+"
3. Enter the "0000" PIN code and validate.
> The Parrot MINIKIT+ says «Pairing successful»
when both devices are paired.
> Depending on the model of your phone, the connection will then be automatic as
soon as your phone is close enough to the Parrot MINIKIT+.
• If you want
vate the Dual
Parrot MINIKIT+ at the same time, you can always answer an incoming call on either
phone.
Note:
Only the phonebook of the first paired phone will be available on the Parrot
MINIKIT+.

Synchronising the phonebook

• With most of the Bluetooth phones, the phonebook is automatically synchronized in the kit
memory.
Note: Only the contacts stored in the phone memory are synchronized. If your contacts
are stored in your SIM card memory, transfer them onto your phone memory.
• If your phone does not support automatic synchronization, you can also use the Object
Push function of your phone to send contacts from your mobile to the Parrot MINIKIT+ via
Bluetooth. To do so, select
• All your contacts, after automatic synchronization or Object Push process, are directly pro-
vided with a voice tag in the Parrot MINIKIT+. Consequently, you don't have to record your
own voice tag on each contact to make a call via the voice recognition process.
button or wait for a few seconds.
phone, search for Bluetooth
®
to connect a 2
mode option.
Receive contacts.
PIN code : 0000
phone to the
nd
When two phones
Parrot MINIKIT+,
are connected to
acti-
the
DRAFT