Troubleshooting
The kit says « Memory full»
You can pair up to ten devices. If you attempt to pair an eleventh phone, the kit says «memory full». You
must clear the memory by holding down both the red button and the jogwheel for three seconds. Doing so
also clears all the contacts.
The kit seems to be frozen
In case of malfunction, you can reboot the Parrot MINIKIT Smart. To do so, press the Reset button.
The kit does not seem to work with my phone
Make sure your phone is compatible with the Parrot MINIKIT Smart. To do so, refer to the compatibility list
of the Parrot MINIKIT Smart available on our website www.parrot.com, in the Support & Downloads
section.
If your phone is compatible with the Parrot MINIKIT Smart, make sure you have the latest software version
on your Parrot MINIKIT Smart. This update and the update procedure are available on our website www.
parrot.com, in the Support & Downloads section.
The volume of the navigation instructions is too low
To modify the navigation instructions volume, use the jogwheel while a navigation instruction is given.
Troubleshooting
13