Download Print this page
Hide thumbs Also See for CK3000:

Advertisement

notice_eng.qxd
14/02/2002
ENGLISH
COMMUNICATE
Dialing a number manually: Use the phone keypad to dial the number. Your conversation will connect automatically in
hands-free mode. The buttons supplied with the hands-free kit are your principal tools for making and receiving calls.
Making a call by vocal recognition :: Press the green button and wait for the tone, then say the name of the person you
want to call. e.g.: press green button, [beep], Nicholas.
To re-dial last number called : Press and hold green button.
For an incoming call : Press green button to answer.
Press red button if you do not want to receive the call, the caller will then be connected to your messaging service.
Managing two incoming calls : A warning tone will alert you if someone is trying to get through while you are engaged on
another phone call.
Press green button once to communicate with new caller.
Press green button once to return to your first caller.
To end the communication, press red button once.
Discreet mode : You can return to one-to-one discreet mode during any conversation in hands-free mode and the call will
revert to your phone. Push the green button at any time during the conversation (where you are not using the two incoming
call option).
Adjusting the volume : You can adjust the volume on any conversation through the volume adjuster keys located on the
left of your phone.
Clearing memory : Use the buttons : Press and hold the red and the green buttons together.
CAUTION : Clearing the memory will entail a new pairing phase.

TROUBLESHOOTING

PROBLEMS
CK3000 says: "BluetoothTM connection problem"
Your telephone does not detect the hands-free kit
It takes longer to detect your phone.
Your telephone is not detected.
The person you are calling complains of an echo during
communication.
* Refer to the instructions of your Nokia telephone, if necessary
15:39
Page 4
Switch off your telephone, then switch it on again if CK3000
Switch off your telephone, then switch it on again. Check that
the BluetoothTM connection of your telephone is enabled*.
You must have paired several telephones and the one you
are using does not have priority. Repeat the pairing phase.
SOLUTIONS
stops responding to commands.
Repeat the connection phase.
Reduce the communication volume.
NOKIA
4

Advertisement

loading