Synchronizing The Phonebook; Clearing The Memory - Parrot MKi9100 User Manual

Synchronizing
the phonebook
Clearing the
memory
1. Make sure the Parrot MKi9100 is set so that it is visible by all
Bluetooth ® devices. To do so, press the jog wheel and select
Settings > Bluetooth >Visibility >
The Parrot MKi9100 is visible by default.
2. Press the jog wheel and select
with....
> If your mobile phone's model appears in the list, select it and
confirm by pressing the jog wheel.
> If your mobile phone model doesn't appear in the list, select
the Other phones
3. From your phone, search for Bluetooth peripherals. Refer to
your phone user guide for more information.
> The list of the available Bluetooth peripherals is displayed.
4. Select « Parrot MKi9100 » in the list.
5. Enter « 0000 » on your phone when you are prompted to enter
a PIN code.
> «Pairing successful» is displayed on the screen of the Parrot
MKi9100.
With some Bluetooth phones, the Parrot MKi9100 automatically
synchronizes the names and phone numbers in your mobile with its
phonebook. If your phone doesn't support automatic synchronization,
you can also send contacts from your mobile to the car kit via Object
Push. To do so:
1. Press the jog wheel and select
2. Refer to your phones 'user guide for more information about
sending contacts via Object Push.
You can pair up to 5 devices with the Parrot MKi9100.
If you attempt to pair a 6
« memory full ». You must clear the memory by holding down the
and buttons simultaneously for 3 seconds. This process will also
delete all the contacts synchronized in the kit.
Parrot MKi9100 – User guide
Settings > Bluetooth > Pair
option.
Phone > Receive contacts.
th
phone, the Parrot MKi9100 says and displays
Visible.
12