Supervisor / User Password - Gigabyte GA-586TX3 User Manual

4.13. SUPERVISOR / USER PASSWORD

When you select this function, the following message will appear at the
center of the screen to assist you in creating a password.
ENTER PASSWORD
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS Enter Password:
LOAD SETUP DEFAULTS
ESC : Quit
F10 : Save & Exit Setup
Figure 4.10: Password Setting
Type the password, up to eight characters, and press <Enter>. The
password typed now will clear and previously entered password from CMOS
memory.
You will be asked to confirm the password. Type the password again and
press <Enter>. You may also press <Esc> to abort the selection and not
enter a password.
To disable password, just press <Enter> when you are prompted to enter
password. A message will confirm the password being disabled.
Once the password is disabled, the system will boot and you can enter Setup
freely.
ROM PCI / ISA BIOS
USER PASSWORD
AWARD SOFTWARE, INC.
INTEGRATED PERIPHERALS
SUPERUSER PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
(Shift)F2
Change / Set / Disable Password
4-32
BIOS Configuration
: Select Item
: Chang Color