Table of Contents
Advertisement
Adaptec 78xx Family Driver Installation for Windows NT CDROM
Boot
Installing Windows NT V4.0
The following instructions explain how to install the Adaptec 7800
Family Manager, while installing Windows NT V4.0 from CDROM
Boot.
1. Start your system with the Windows NT Boot CD in the CDROM
drive.
2. During the initial stages of the boot process as soon as you see
blue screen of "Windows NT Setup" then press F6.
3. Press S again to specify an additional device.
4. Select "Other" and feed it the Adaptec 7800 Family Manager
diskette for WinNT 3.5x, 4.0/d2.11 then press Enter.
5. For Ultra2 host adapters(AIC-7890/AIC-7896), Select the
"Adaptec AHA-294xU2/295xU2/AIC-789X PCI Ultra2 SCSI
Controller(NT 4.0)" and press ENTER.
6. Then follow the normal Windows NT installation procedure to
complete the setup processor.
Hardware Installation
3-18
Advertisement
Table of Contents
