Keyboard & Ps/2 Mouse Installation; Scsi Device Installation; Integrated Peripherals - Gigabyte 6GXU User Manual

3.12. KEYBOARD & PS/2 MOUSE INSTALLATION
The main board supports PS/2 Mouse (J1). The BIOS will auto detect
whether the PS/2 Mouse is installed or not & assign IRQ12 for PS/2 Mouse
port if it is installed. After installing the peripheral device, the user should
check everything again, and prepare to power-on the system.

3.13. SCSI DEVICE INSTALLATION

There are four SCSI ports on board, One is 8bit SCSI port for ULTRA SCSI
device, the other one for Ultra wide SCSI , another is for Ultra II SCSI. And
total 15 SCSI devices can exist in a system.
Single Ended and LVD Terminator Control are controlled by BIOS Setup (In
the INTEGRATED PERIPHERALS Setup page.)
Terminator ON/OFF rules
State 1. Ultra or Ultra wide SCSI Devices connecting to SE Port :
CASE 1: Single Ended Termination: Both
LVD Terminator Control : Enabled
System has 16 bit SCSI
1
16 bit
SCSI DEVICE
SE
Mainboard
Terminator ON Terminator OFF
System has only 8 bit SCSI device
2
8 bit
SCSI DEVICE
SE
Mainboard
Terminator ON Terminator OFF
16 bit
SCSI DEVICE
15
Terminator ON
8 bit
SCSI DEVICE
7
Terminator ON
3-8
Hardware Installation