Configuring The As/400 Host System - Axis 5470e User Manual

22

Configuring the AS/400 Host System

When configuring the AS/400 host system you must create a printer device description as
described below:
1. Issue the command CRTDEVPRT.
2. Select a name for the printer device and enter it on the Device Description
(DEVD) line. The name may comprise the letters A-Z and the numerals 0-9, but must
begin with a letter. A maximum of 10 characters are allowed. In the following
instructions, the printer device name will be referred to as AXISPR1.
3. Enter *LAN at the Device class (DEVCLS) line.
4. Enter *IPDS at the Device type (TYPE) line.
5. Enter 0 on the Device model (MODEL) line.
6. Enter *IP at the LAN attachment (LANATTACH) line.
7. Enter a port number at the Port number (PORT) line. The Axis print server is
pre-configured with the port number 5001 for IPDS printing.
8. Enter a FGID number at the Font Identifier (FONT) line, e.g. 11 (Courier).
9. Enter the Remote location (RMTLOCNAME). Use the IP address of the AXIS
5470e. Press Enter on your keyboard to create the printer device description.
AXIS 5470e User's Guide