Configuring The Axis 5470E; Verifying The Communication Link (As/400) - Axis 5470e User Manual

Network print server

Hide thumbs Also See for AXIS 5470e:

Table of Contents

Configuring the AXIS 5470e

Follow the instructions below to configure your AXIS 5470e for AS/400 or Mainframe

IPDS over PPR/PPD printing using a standard Web browser:

1. Start a Web browser, e.g. Internet Explorer or Netscape Communicator and enter the IP

address or the host name of the AXIS 5470e in the location field. Press Enter.

The internal Web pages of the AXIS 5470e will appear.

Note:

To protect the admin pages and the Configuration Wizard from unauthorized use, enter a password

(default Pass) in the Root Password field under admin | General Settings.

Note for IPDS printing:

In the Configuration Wizard, you can choose between PCL or PostScript printing. Choose the printer

language that corresponds to your printer.

2. Click the Configuration Wizard for IBM sessions button.

3. Click the Add Session button. This will start the Configuration Wizard which is a

step-by-step guide through the required configuration settings.

Follow the instructions below to verify the communication to the AXIS 5470e:

1. Type WRKCFGSTS *DEV AXISPR1 on the AS/400 command line and press Enter. The

previously created printer device will be displayed. The status of the printer device should

VARIED OFF

AXIS 5470e User's Guide

Table of Contents