We Manufacturer IAG Sanecore Science & Technology Industry Park, Jiuwei Village, Xixiang Town, Shenzhen, China, 518102 Declare that the product EMULATION WRGB is in conformity with 89/336 EEC-EMC directive and with the actual required safety standards in accordance with LVD 73/23 EEC Shenzhen, 01 August 2010 ATTENTION: carefully read the directions of this manual.
COEF EMULATION WRGB 11) MAX ambient temperature: 60° C. 12) MAX external surface temperature: 80° C. 13) Don’t look directly the lamp trough the lens. 14) We recommend not to look at the lamp without wearing a proper protection; also ensure that the covers are as- sembled to the equipment.
(-) into 3-pin XLR plug and plug it in the DMX output of the last fixture. 1. INTRODUCTION EMULATION WRGB is a spotlight with true color mixing for 16 millions of color and optional projection angle, it’s a per- fect fixture to extent the color change function than conventional PAR 64 spotlight.
COEF EMULATION WRGB 2.3 MENU STRUCTURER Note 1: The LED display will blink twice after pressing ENTER key, that’s means the setup is complete. Note 2: COLOR CHANGE The function of “NOT ID 001 ON” is using in the DMX 8 CHANNEL system mix with AUTO ID and NON AUTO ID devices.
COEF EMULATION WRGB 3. APPLICATIONS EXAMPLE 3.1 MANUAL DMX ADDRESSING DMX MANU ID 001 DMX MANU ID 009 DMX MANU ID 017 DMX MANU ID 025 Channel 1-8 Channel 9-16 Channel 17-24 Channel 25-32 DMX Controller 3.2 AUTO ID (DMX) ADDRESSING...
COEF EMULATION WRGB 4. TROUBLESHOOTING To ensure the reliability of the spotlight it should be kept clean. It is recommended that the fan should be clean every 15 days with compressed air and in case of more resistant dirt with one soft brush.
Need help?
Do you have a question about the EMULATION WRGB and is the answer not in the manual?
Questions and answers