We Manufacturer IAG Sanecore Science & Technology Industry Park, Jiuwei Village, Xixiang Town, Shenzhen, China, 518102 Declare that the product EMULATION Strobe is in conformity with 89/336 EEC-EMC directive and with the actual required safety standards in accordance with LVD 73/23 EEC Shenzhen, 01 August 2010 ATTENTION: carefully read the directions of this manual.
COEF EMULATION STROBE 11) MAX ambient temperature: 60° C. 12) MAX external surface temperature: 80° C. 13) Don’t look directly the lamp trough the lens. 14) We recommend not to look at the lamp without wearing a proper protection; also ensure that the covers are as- sembled to the equipment.
High tech and patented material offer the best ventilation. 2. OPERATION The setup of EMULATION STROBE is very easy via related keypads with necessary information shows on the display. Also with two LEDs indicating the operation status. Please refer to following instructions.
COEF EMULATION STROBE 2.3 MENU STRUCTURER Note 1: The LED display will blinking twice after pressing ENTER key, that’s means the setup is complete. Note 2: COLOR CHANGE The function of “NOT ID 001 ON” is using in the DMX 2 CHANNEL system mix with AUTO ID and NON AUTO ID devices.
COEF EMULATION STROBE 3. APPLICATIONS EXAMPLE 3.1 MANUAL DMX ADDRESSING DMX MANU ID 001 DMX MANU ID 003 DMX MANU ID 005 DMX MANU ID 007 Channel 1-2 Channel 3-4 Channel 5-6 Channel 7-8 DMX Controller 3.2 AUTO ID (DMX) ADDRESSING...
COEF EMULATION STROBE 4. TROUBLESHOOTING To ensure the reliability of the spotlight it should be kept clean. It is recommended that the fan should be clean every 15 days with compressed air and in case of more resistant dirt with one soft brush.
Need help?
Do you have a question about the EMULATION STROBE and is the answer not in the manual?
Questions and answers