Table of Contents
Advertisement
OPERATION AS A PC MONITOR
Main input settings
H-Freq. :
33.5 kHz
V-Freq. :
43.4 Hz
Pixel Clk :
44.9 MHz
H/V Pol. :
H/V Pol. :
User timings
Auto Setup
V Pos. :
V Size :
H Size :
H Pos. :
Phase :
Select
Back
and open
Exit
Main input settings
H-Freq. :
33.5 kHz
V-Freq. :
43.4 Hz
Pixel Clk :
44.9 MHz
H/V Pol. :
H/V Pol. :
User timings
Auto Setup
V Pos. :
V Size :
H Size :
H Pos. :
Phase :
Select
Back
and open
Exit
Set Up
Display Source Info :
Language :
English
OSD Set Up
Pwe Down/Stand-By
Reset to factory Defaults
Sleep Timer :
Select
Back
and open
Exit
Show Logo :
Reaction on PC syncs :
4
Select »Main input settings« with »P+« or »P-« and confirm with »OK«.
– The first four lines are information about the PC.
Note:
The other settings are explained in the following sections.
Adjusting the picture
+/+
1
Select »Auto Setup« with »P+« or »P-« and confirm with »OK«.
+/+
Note:
With the »V Pos«, »V Size«, »H Size«, »H Pos« and »Phase« settings, you
can customise the picture of the PC.
Select with »P+« or »P-« and press » « or » « to implement the setting.
2
Press »TXT« to finish the settings.
User formats
If different PCs are connected to the television, you can assign user formats.
1
Select »User timings« with »P+« or »P-« and confirm with »OK«.
+/+
+/+
Note:
With the »V Pos«, »V Size«, »H Size«, »H Pos« and »Phase« settings, you
can customise the picture of the PC.
Select with »P+« or »P-« and press » « or » « to implement the setting.
2
Press »TXT« to finish the settings.
Evaluating synchronisation signals
If this function is activated, the device automatically switches to standby when a
signal is detected at the
On
the preset channel »AV6 PC (RGB)« or »AV7 PC (DVI)« has been selected.
1
Press »i« to open the main menu.
Off
2
Select »Set Up« with »P+« or »P-« and confirm with »OK«.
3
Select »Pwr Down/Stand-By« with »P+« or »P-« and confirm with »OK«.
4
Select »Reaction on PC syncs« with »P+« or »P-« and switch off or on with
» «.
On
On
5
Press »TXT« to finish the settings.
___________________________________________
»PC
(RGB/DVI)« socket. The condition for this is that
25
Advertisement
Table of Contents
