Table of Contents
Advertisement
A
1
D
4
6
SET-UP AND SAFETY ____________________________________
Assembling the glass panes
1
Insert a rubber section (A) in each of the rear feet of the unit.
2
Pull the protective foil (B) off the Velcro holders (C).
3
Centre the rear glass pane (height 182 mm), place it in the rubber sections
(A) and press it against the Velcro holders (C).
A
2
4
Place one rubber section (D) on the front glass pane (height 150 mm) at the
spacing of the feet of the unit.
5
Pull the protective foil (E) off the Velcro holders (F).
6
Centre the front glass pane, push it up into the feet of the unit and press it
against the Velcro holders (F).
D
5
Removing the glass panes
1
To remove the front or rear glass pane, carefully pull the pane off the Velcro
holders and take it out.
B
C
3
E
F
6
C
A
F
Advertisement
Table of Contents
