Table of Contents
Advertisement
OPERATION AS A PC MONITOR
H Freq :
48.5 kHz
V Freq :
60.1 Hz
Pixel Clk :
65.1 MHz
H/V Pol :
-/-
User timings
-
Auto Setup
V Pos :
V Size :
H Size :
H Pos :
Phase :
H Freq :
48.5 kHz
V Freq :
60.1 Hz
Pixel Clk :
65.1 MHz
H/V Pol :
-/-
User timings
-
Auto Setup
V Pos :
V Size :
H Size :
H Pos :
Phase :
Display Source Info :
Language :
English
OSD Set Up
Pwr Down/Stand-By
Reset to factory Defaults
Sleep Timer :
Show Logo :
Reaction on PC syncs :
4
Select »Main input settings« with »P+« or »P-« and confirm with » «.
– The first four lines are information about the PC.
Note:
The other settings are explained in the following sections.
Adjusting the picture
1
Select »Auto Setup« with »P+« or »P-« and confirm with » «.
Note:
With the »V Pos«, »V Size«, »H Size«, »H Pos« and »Phase« settings, you
can customise the picture of the PC.
Select with »P+« or »P-« and press » « or » « to implement the setting.
2
Press »i« to finish the settings.
User formats
If different PCs are connected to the television, you can assign user formats.
1
Select »User timings« with »P+« or »P-« and confirm with » «.
Note:
With the »V Pos«, »V Size«, »H Size«, »H Pos« and »Phase« settings, you
can customise the picture of the PC.
Select with »P+« or »P-« and press » « or » « to implement the setting.
2
Press »i« to finish the settings.
Evaluating synchronisation signals
If this function is activated, the device automatically switches to standby when a
signal is detected at the »DVI-I« socket. The condition for this is that the preset
channel »PC (RGB)« or »PC (DVI)« has been selected.
On
1
Press »i« to open the main menu.
2
Select »Set Up« with »P+« or »P-« and confirm with » «.
3
Select »Pwr Down/Stand-By« with »P+« or »P-« and confirm with » «.
Off
4
Select »Reaction on PC syncs« with »P+« or »P-« and switch off or on with
On
» «.
On
5
Press »i« to finish the settings.
___________________________________________
25
Advertisement
Table of Contents
