Table of Contents
Advertisement
Four-Channel Digital Video Recorder
NOTE: When entering no name or a name already registered on the DVRNS server, an error
message displays.
Highlighting OK and pressing the
button registers the DVR on the DVRNS server. Proper
DVRNS settings will display the help desk information of the DVRNS server in the box beside
Help Desk.
CAUTION: If you want to use the same DVR name registered on the DVRNS server
after initializing the system using the factory reset, you need to contact the DVRNS
server manager. Please record and keep the help desk information before factory
reset.
CAUTION: The DVRNS registration will be limited to one DVRNS server. The DVR
cannot be registered to multiple DVRNS servers. Please contact your network
administrator when you want to register the DVR to another DVRNS server.
Callback Center Setup Screen
The DVR can be set up to contact a computer running DX-PC4U (Remote Operation Software) on
a LAN when an event occurs. Also it can be set up to dial a pager with a numeric message when an
event occurs if you have a modem connected to the DVR.
Callback Center Setup by LAN connections
Figure 71 — Callback Center (LAN) Setup screen.
Highlight the box beside IP Address and enter the IP address of the computer you want contacted
during an event.
Highlight the box beside Retry and enter the number of times you would like the DVR to try
contacting the computer. You can select from 1 to 10 retries.
Highlight the box beside E-mail notification and press the
button to toggle between On and Off.
53
Advertisement
Table of Contents
