Time-Lapse Record Mode Setup Screen; Figure 47 - Time-Lapse Record Setup Screen - Mitsubishi Electric DX-TL4U User Manual

Digital recorder

Table of Contents

Four-Channel Digital Video Recorder

Pressing the

button on the front panel enters the Panic Recording mode. You can program

PANIC

the recording speed, quality and duration when the DVR is in the Panic Recording mode. On

Panic Recording Speed can be set from 0.5 to 30 ips (25 ips PAL), and On Panic Recording

Quality can be selectable from Very High, High, Standard and Low. On Panic Recording

Duration can be set from 5 to 60 minutes. The panic recording will be stopped automatically

according to the preset duration as long as the

button is not pressed to stop the panic

PANIC

recording. Select No Limit if you want to stop panic recording manually.

NOTE: When the DVR is in the Panic Recording mode, it ignores the time-lapse or event

recording settings and follows the panic recording settings.

NOTE: The maximum panic recording speed is 30 images per second (25 ips for PAL) when

the resolution is set to Standard. However, when set to High, the recording speed will be

decreased to 15 images per second (12.5 ips for PAL).

NOTE: When the DVR is in the Panic Recording mode, the REC LED on the front panel flickers

and the

displays on each camera screen.

Highlight the first box beside Auto Deletion. Pressing the

button toggles between On and Off.

When set to On, the DVR will delete video recorded earlier than user-defined period. Highlight the

second box beside Auto Deletion, and press the

button to select the length of time recorded data

will be kept from 1 to 99 Days.

NOTE: When the End Of Disk is set to Stop, DVR will NOT restart recording even when the

video recorded earlier than user-defined period is deleted.

You can save your changes by highlighting OK and pressing the

button . Selecting Cancel exits

the screen without saving the changes.

Time-Lapse Record Mode Setup Screen

Figure 47 — Time-Lapse Record Setup screen.

Highlight the box under the Speed heading and press the

button. A drop-down list of recording

speeds appears. You can select from 0.5 ips to 30 ips (25 ips for PAL).

Table of Contents