Axis 540+ User Manual page 54

AXIS 540/640 User's Manual
Notes:
PSERVER_NDS
parameter
If the PSERVER_NDS parameter includes the name of a tree and
not a specific file server, RCONAG6.NLM must be running on at
least one file server in the specified tree.
If the IPX and IP transport protocols are enabled in your network,
you can use AXIS NetPilot to install the AXIS 540/640 and to
connect print queues. Please refer to Basic Setup with AXIS
NetPilot, on page 27 and Advanced Installation using AXIS
NetPilot, on page 48.
Pure IP requires that you run NetWare 5 or higher.
As shown in the instructions in Installing the AXIS 540/640, on page
52, the PSERVER_NDS parameter specifies which NDS tree or file
server the AXIS 540/640 will login to. It also specifies the path to the
print server object in the tree. The syntax of the PSERVER_NDS
parameter is displayed in the following examples:
Example 1:
TREE:NW5_TREE DevDept.acme
In this example a print server named DevDept, with context acme,
will login to the tree, NW5_TREE.
Example 2:
171.16.2.249 DevDept.acme
In this example a print server named DevDept, with context acme,
will login to a file server with the IP address 171.16.2.249. If you have
a (D)DNS server on your network you can replace the IP address with
the host name.
Section 4: Setting Up - NetWare
53