Install The Switch; Desktop Installation - Planet MGSW-24160F User Manual

There is a power switch that is for AC power input using only. As DC power input has no power switch.
The device is a power-required device, it means, it will not work till it is powered. If your
networks should active all the time, please consider using UPS (Uninterrupted Power Supply)
for your device. It will prevent you from network data loss or network downtime.
In some area, installing a surge suppression device may also help to protect your Managed
Switch from being damaged by unregulated surge or current to the Switch or the power
adapter.

2.2 Install the Switch

This section describes how to install your Managed Switch and make connections to the Managed Switch. Please read the
following topics and perform the procedures in the order being presented. To install your Managed Switch on a desktop or shelf,
simply complete the following steps.

2.2.1 Desktop Installation

To install the Managed Switch on desktop or shelf, please follows these steps:
As desktop and rackmount installation demonstration as following is an example for
SGSW-24040, however, the installation procedure of MGSW-24160F is the same with
SGSW-24040.
Attach the rubber feet to the recessed areas on the bottom of the Managed Switch.
Step1:
Place the Managed Switch on the desktop or the shelf near an AC power source, as shown in
Step2:
Figure 2-4 Place the Managed Switch on the Desktop
User's Manual of MGSW-24160F
30
Figure 2-4.